If you’ve experienced little to no water pressure while showering, you know how annoying it is. Taking a shower not only helps you keep clean and fresh but also helps with relieving stress, reduces various pains, and feels awesome. The only thing that doesn’t feel great is when the water barely comes out.
Actually, it is a very common problem with various causes, but thankfully, there are various ways to avoid and fix it. So, keep reading to learn how to avoid water pressure loss in your shower.
Identify Signs of Water Pressure Loss
The best thing you can start with is identifying any signs of water pressure loss.
First of all, it should be noted that the pressure in the water supply system depends on the type of property and the piping system.
The complexity of the organisation of the central water supply, and the huge number of factors affecting the individual characteristics of the buildings, do not allow us to say unequivocally what the minimum or maximum pressure in the pipes should be.
Pressure loss occurs if there is a pipe leak in your home. Turn off all faucets, check your water meter, and wait a few hours without using water to check for leaks. If the water meter reading changes, you probably have a leak.
Another potential cause is mineral and sediment build-up either in the pipes or in the aerators of faucets and shower heads. This buildup slows the water flow, resulting in low pressure.
Check the Showerhead and Faucet
If you think the problem is build-up, start with the aerators or shower heads where you’re having water pressure problems.
Unscrew the faucet end of the faucet to clean it. Soak the aerator in vinegar overnight to loosen the buildup.
If you cannot remove the aerator or shower head, place vinegar in a plastic bag. Tie the bag around the faucet so that the aerator or shower head is in the solution.
Other problems often require the help of a reliable plumber to restore water pressure.
Assess the Water Supply System
Household appliances such as a washing machine or dishwasher may not start if the water pressure is too low.
Low pressure can cause equipment damage, such as burning out the heating element. In order to increase the water pressure in the water supply system in your home, it is not necessary to proceed immediately to a cardinal repair.
There are a few simple solutions to check exactly where the problem is.
After assessing the water supply system, it is possible to determine that the plumbing is the cause of the pressure loss in the water supply system. Each faucet or valve is opened separately. This way, you can determine in which component the pressure does not meet the standard. If the pressure in all of them is weak, the problem is not in them but in the water supply.
Review Plumbing Connections
Sometimes, low water pressure could be caused by clogged pipes due to hard water. If that’s the case you’re facing, it’s best to contact a professional plumber to clean them or invest in a water-softening system. It will prevent further water pressure problems.
Another common issue is corrosion which causes blockages and makes it harder for hot water to go through the pipes. Whatever the case, it’s best to trust a reliable plumber when it comes to problematic pipes.
Consider Water Flow Restrictions
Sometimes, people confuse water flow restrictions with low water pressure. It’s common that over time, mineral deposits in the water build up in the shower head and clog the openings.
This makes it hard for the water to push its way through, leading to the confusion of low water pressure. This is good news because you’re facing a less serious problem that you can fix yourself.
To inspect your shower head, you’ll need to unscrew it from the wall. Using an old toothbrush and some cleaning solution, you can clear away the clogged openings from the debris.
Address Water Pressure Issues in Multi-story Buildings
It’s common in multi-story buildings that the water filter in the plumbing system hasn’t been inspected or cleaned for a while.
This filter is responsible for removing debris, such as leaves or other sediments, before they find their way to the water supply. But if the filter hasn’t been checked or cleaned any time soon, it may have accumulated this debris, leading to low water pressure.
It’s a good idea to ask your neighbours if they’re experiencing similar issues with the water pressure.
Consult with a Professional Plumber
There are several issues with low water pressure that you can fix on your own if you have detected what’s the actual problem. Unfortunately, not everyone is born with plumbing skills and experience, and in this situation, it’s best to call a professional plumbing company for consultation.
A professional will gladly inspect, diagnose, and fix your low water pressure issues, and you can rest assured that everything will be addressed professionally.
Take Preventive Measures
If you don’t want to experience low water pressure issues, then you’ll have to take preventive measures.
For example, you can install a filtration system to keep minerals out of the pipes to avoid future buildup.
Furthermore, you should check pipes regularly to find and fix leaks on time before they cause more serious issues that will cost you more money. It’s not difficult to avoid low water pressure. You just need to pay attention to your fixtures, check and clean them regularly.
Handling your own plumbing repairs can save you money, but one mistake can cost you much more and cause damage to your home.
Remember these tips if you plan to fix a plumbing problem yourself. Whatever the issue, it’s always better to make a consultation with a reliable local plumber with years of experience.
If you’re not sure about your plumbing skills, it’s best to leave this job to the professionals and save yourself some more serious troubles.